Skip to content
Request a callbackCallback

For owners of plumbing and heating firms

How to Value a Plumbing and Heating Business: What It Is Worth

Sviatoslav JerdetchiiCEO & Founder of Craftex. Updated , 4 min read

Heating engineer in a hi-vis jacket working on an underfloor heating manifold

The short answer

To value a plumbing business or a heating firm, buyers start from its steady, adjusted profit, then weigh how much of the work repeats, the engineers, the registrations and the risks. For tax, the test is the price it might fetch on the open market (TCGA 1992, s.272).

  1. Profit counts more than turnover. Buyers adjust it for one-off costs and the owner's pay.
  2. Service and maintenance contracts raise the value, because the income repeats.
  3. Vans, tools and stock count, but finance owed on them is taken off.
  4. Reliance on the owner, one big client or lapsed registrations lower the value.

How to value a plumbing business, or a combined plumbing and heating firm, comes down to one question. How much steady profit will it make for a new owner, and how safe is that profit? For tax, the law's test is the price it might fetch on the open market (TCGA 1992, section 272).

This guide explains how buyers work out what a plumbing and heating business is worth. It is written by Craftex, a London-based property development and construction company that is buying businesses itself. If your firm has £1M or more in annual revenue, you can sell your business to Craftex. Tell us about your business in confidence.

This is general information, not financial advice. Speak to your accountant before you put a figure on your business.

How to value a plumbing business in four steps

Most buyers follow four steps.

  1. Get the numbers. The last few years of accounts and this year's figures.
  2. Find the true profit. Take out one-off costs and adjust the owner's pay.
  3. Weigh the quality of the profit. Repeat work, clients, engineers and risks.
  4. Adjust for debt and cash. To reach what you actually receive.

For the general methods behind these steps, read how to value a business in the UK.

Step 2: find the true profit

Buyers value plumbing and heating firms mainly on profit, not turnover. A firm can be busy and still keep little. Read turnover or profit: how businesses are valued for why.

The buyer adjusts your profit to show what a new owner would earn:

  1. Owner's pay. Your salary and dividends are replaced by a normal salary for the role.
  2. One-off costs. A dispute, a move or a one-time repair are added back.
  3. Family on the payroll. Pay for people who do not work in the business is added back.
  4. Vehicles and property. Costs that will not carry on are taken out.

The result is the steady, underlying profit. This is the starting point for the value.

Step 3: what makes the profit worth more

Two firms with the same profit can be worth very different amounts. The difference is how safe the profit is.

What raises or lowers the value of a plumbing and heating business
Raises the valueLowers the value
Service and maintenance contractsMostly one-off jobs
Many clients, landlords and housing providersOne client with most of the work
Qualified engineers who will stayOwner does the pricing and the client calls
Registrations current and in the business's nameLapsed or missing registrations
Clean records and few callbacksOpen disputes and warranty claims
Commercial and planned workWork won only on price

Repeat work matters most. Gov.uk says landlords must have an annual gas safety check on each appliance and flue. Contracts like these bring income every year, so a buyer can count on them.

Registrations and the value

Registrations are part of what a buyer pays for. Without them, a plumbing and heating firm cannot do much of its work.

The Gas Safety (Installation and Use) Regulations 1998 set the rule. Staff may only work on gas fittings if their employer is on the HSE-approved register. A buyer will check your gas registration, competent person scheme membership and any F gas and MCS certificates.

Heat pump work can add to the value. Gov.uk says the Boiler Upgrade Scheme gives £7,500 towards an air source or ground source heat pump in England and Wales. Customers find MCS certified installers to do the work.

Step 4: vans, stock, debt and cash

The value of the business is not always what you receive. A buyer agrees a value, then adjusts it.

  1. Vans and equipment. They count as part of the business. Finance or leases owed on them are usually taken off.
  2. Stock. Normal stock is expected to stay. Old or slow-moving stock may be valued at less.
  3. Debtors. Money owed by clients. Old debts may be valued at less.
  4. Loans and tax owed. Usually taken off.
  5. Spare cash. Usually added.

When you sell your shares, your gain is usually taxed as Capital Gains Tax. Gov.uk says Business Asset Disposal Relief can bring the rate to 18% from 6 April 2026, if you qualify. Ask your accountant early.

How to raise the value before you sell

Most of what raises the value takes a year or two to show.

  • Put service and maintenance contracts in writing, with renewal dates.
  • Win more clients, so no single one is too big.
  • Train and keep engineers, and give managers the client contact.
  • Keep every registration current.
  • Keep clean, monthly figures.

For what to prepare for a sale, read selling a plumbing and heating business.

What a buyer like us looks at

Craftex is a London-based property development and construction company specialising in commercial, industrial and high-end residential projects. We are expanding and buying businesses that meet our criteria.

£1M+annual revenue for construction and trade businesses
£500K+annual revenue for design and consultancy businesses
No upper limitin London and across the UK

We look at your profit record, repeat work, clients, engineers, registrations and how much the business depends on you. Read what we look at in a plumbing business on our page for plumbing firms.

Our owner, Sviatoslav Jerdetchii, is buying businesses to build Craftex Group. The process is simple: you send an enquiry, you have a call with our owner, and then a decision. All enquiries are confidential. Tell us about your company.

Frequently asked questions

How do you value a plumbing business?

Start with the profit of the last few years and adjust it for one-off costs and the owner's pay. Then a buyer weighs the repeat work, the client mix, the engineers, the registrations and the risks. Debt is taken off and spare cash added to reach what the owner receives.

How much is a plumbing and heating business worth?

There is no fixed figure. Value depends mainly on steady profit and how safe it is for a new owner. A firm with service contracts, a strong team and many clients is usually worth more than one with the same profit from one-off jobs run by the owner.

Are service contracts worth more than installation work?

Usually, yes. Service and maintenance contracts bring income every year, so a buyer can rely on them. Gov.uk says landlords must have an annual gas safety check on each appliance and flue, which gives many heating firms repeat work.

Do vans and stock add to the value?

They count, but usually as part of the business rather than on top of the profit. Any finance or lease owed on vans and equipment is normally taken off the price. Old or slow-moving stock may be valued at less than you paid.

Who can value my plumbing business?

An accountant or corporate finance adviser who knows trade businesses can give you a valuation. For tax, the law uses market value: the price the business might fetch on the open market. Each buyer will still form its own view after checking the business.

Thinking of selling your plumbing or heating business?

Our owner, Sviatoslav Jerdetchii, is buying businesses to build Craftex Group. We buy construction and trade businesses from £1M annual revenue, with no upper limit, in London and across the UK. All enquiries are confidential.

WhatsApp us